LowLifeProjects Newly Designed Custom Lower Control Arm/Ball Joint Extension Plates!
Vehicles: ( Toyota Camry 92-2017 )
Product: Lower Control Arm/Ball Joint (Bolt on) Extension Plates
Product Details: Lower Control Arm/Ball Joint (Bolt On) Extension Plates made from Cold Rolled 3/8 Steel, CNC Custom Designed & Cut. Will provide from 25, 38 AND 50 mm Lower Extension.
- *NOTE: IF YOU ARE RUNNING THE 25MM (FIRST ADUSTMENT HOLE) YOU MUST PURCHASE FULL (12) SPACERS WITH YOUR RCA KIT! DROP DOWN BOX IS AVAILABLE TO ORDER FULL SET OF (12) SPACERS!
- Recommend having -5 degrees of camber or higher.
- Only run first adjustment hole unless you have -8 degrees of camber or more.
- Camber degree is anywhere from -1 to -4, depending on any other Aftermarket Parts. ( Ex. Tilted Spindles, LLP Camber Plates etc. )
*NOTE: (VERY IMPORTANT): Outer Tie Rods MUST be Extended to Achieve correct alignment, IF VEHICLE HAS 0 DEGREES of Camber. IF Vehicle has -8 OR MORE, Tie rods most likely will NOT have to be Extended.
Installation Details: Video is Available on our Instagram Page IGTV @LowLifeProjects. Top Camber Plates are Recommended (We Also Supply) & Factory Ball Joint Studs Must be Pressed Out for Installation.
*IGTV Installation/Guide Video Link: https://www.instagram.com/tv/CQ_dvA_HZ7h/?utm_medium=copy_link
Note: (Kits will include New Hardware Bolts, Nuts & Washers for Installation)